10,000円(税込)未満で1%
10,000円(税込)以上で5％のポイントが付与されます。
AMAZING FLIGHT DISTANCE
Absolute distance, this is BALDO.
The BALDO GT5 has a 452cc volume and a pear-shaped head shape, improving ease of address and stability. The deep face design is designed to produce a long effective impact distance and a low-spin high ball trajectory. Compared to the GT2, it has a slightly shallower center of gravity design, and by placing pentagon power plates on the sole and back face, it has evolved into a model that achieves a head balance that does not lose to the ball when the face hits the ball at impact. In addition, the center of gravity balance can be changed by changing the pentagon power plate. Two 5g pieces are standard, but it can be changed in 1 gram increments to 2g, 3g, 4g, 6g, 7g, and 8g.
*The listed weight includes two Pentagon weight plates.
*The color of the crown image has been adjusted to make the shape easier to understand and may differ from the actual product color.
*The image is for illustrative purposes only and may differ from the actual product.
Pear head shape, deep face model.
The overwhelming power of the ball is at its finest here.
BOOSTER GROOVE
By providing a booster groove near the face of the sole, it utilizes the force of the deflection at impact to generate a strong repulsive force of the face. It increases the initial velocity of the ball that bounces off the periphery of the face at impact. It also improves the tolerance for mis-hits, reducing the amount of unnecessary backspin when the ball is mis-hit below the center of gravity, preventing loss of distance.
VASSIST TPU PLATE
On the left and right sides of the tool face, a bassist plate made of thermoplastic polyurethane elastomer, a material that has the flexibility of rubber and the strength of hard plastic, is attached. This helps to moderately suppress and absorb the vibrations of the body that occur during impact.
FORGED DAT55G CUP FACE
The face material is DAT55G, and the precision forged cup face has an expanded impact area by changing the heat treatment of the upper bridge and the amount of heat treatment of the center of the face. The face absorbs impact energy more softly than ever before, producing a ball with a forward initial velocity. In addition, micro laser milling between the score lines provides a stable amount of spin.
TUNING INJECTION HOLE
An injection hole has been added to the toe side, allowing for further tuning of the impact sound and weight adjustment.
VASSIST TPU PLATE
The left and right sides of the sole are made of a material that combines the flexibility of rubber with the strength of hard plastic.
Equipped with a part (VASSIST plate) made of thermoplastic polyurethane elastomer (TPU).
This provides a vibration assist function that effectively suppresses and absorbs body vibrations that occur upon impact.
FORGED DAT55G CUP FACE
DAT55G is used for the face material, and the precision forged cup face has an expanded impact area by changing the heat treatment temperature of the upper and lower bridge parts and the heat treatment temperature of the center part of the face.
The face absorbs the ball's impact energy more flexibly than ever before, resulting in a high initial velocity.
Micro laser milled score lines are applied between the score lines to provide a consistent amount of spin.
PENTAGON POWER PLATE
The 5g Pentagon Power Plate is attached to the sole and back face, allowing you to adjust the balance to push the ball more strongly.
IMPACT SOUND
The impact sound, which was a weakness of the sleeve model, has been thoroughly improved and made more powerful. The impact sound specification evokes a firm, comfortable flight and the power of the ball.
TUNING INJECTION HOLE
An injection hole has been added to the toe side, allowing for further adjustment of the impact sound and center of gravity.
ADJUSTMENT FUNCTIONS
8 ADJUSTABLE ANGLE SLEEVE TYPE1.2 & 1.5
The loft angle can be selected from 8 positions within the range of ±1.0 degrees for TYPE1.2 and ±1.5 degrees for TYPE1.5 based on the head loft angle. Please see below for the loft angle, lie angle, and FA for each position.
Adjustable sleep Sold separately: 4,400 yen (tax included) The product comes with sleep TYPE 1.2.
PENTAGON POWER PLATE
The Pentagon Power Plate allows you to adjust the head weight to any weight: 2g, 3g, 4g, 6g, 7g, or 8g.
Pentagon Power Plate Sold separately: 2,200 yen (tax included)
BALDO ORIGINAL TORQUE WRENCH
This is a dedicated torque wrench that can be used to attach BALDO dedicated weights equipped with an adjustable sleeve. Please be careful not to overtighten the weight screws.
Torque wrench Sold separately: 3,300 yen (tax included)
BALDO ORIGINAL HEAD COVER BALDO & CLOVER
［ DRIVER dedicated head cover ］
Head covers are sold separately and are available in a choice of BALDO embroidery type or clover applique type, both in black and white.
Driver head cover Sold separately: 5,500 yen (tax included)
Purchase the head cover here
BALDO TT DRIVER GT5 DEEP PROTO
| size | Loft angle | Lie angle | Face Angle | Head Weight | Left Hand |
|---|---|---|---|---|---|
| 452cc | 9.0-11.0° | 59° (※1) | 0° | 198g (※2) | ○ |
*1 8 adjustable angle dials
*2 Variable weight screw produces different head weights
2g 3g 4g 6g 7g 8g
[ Material manufacturing method ]
BODY: 8-1-1Ti precision casting + VASSIST PLATE + PENTAGON POWER PLATE 5g x 2 pieces
FACE: DAT55G precision forged cup face + micro laser milling Selling price: 88,000 yen (tax included)
